Mersen EP FEC-11-11-BA Midget Fuse Holder

Single and Dual Pole In-Line Fuseholders Accommodate Midget or Class CC Fuses; Captive Nut or Screw for Quick Installations; 3 O-Rings Per Pole for Water Tight Applications; Optional Cone Shaped Insulator Boots Can Be Slipped onto Provide a Watertight Seal; Both Single and Dual Pole Versions Have an Optional Breakaway Feature Which Safely Disconnects the Load in Case of a Pole Knockdown; Fuses Remain Safely Encapsulated Within the Watertight Fuse Holder on the Load Side, Once the Pole Has been Reinstalled the Fuse Holder Can Be Easily Reconnected; Colored O-Rings for Quick Detection; Wide Assortment of Terminal Variations; High Heat, Impact-Resistant Insulator; Polarized Dual Pole Provides Simultaneous Disconnection; Permanently Installed Neutral Versions Quickly Identified by White Nuts; Tulip Fuse Clip for Improved Contact and Low Losses; Environmentally Friendly No Lead Solder Used; Wire Gauge Size Identified on Insulation Boots for Quick, Accurate Trimming; Time Delay for Motor Starting and Transformer Inrush

Specifications:

Type: In-Line Breakaway
Material: Polyethylene
Number of Poles: 1
Fuse Type: Class CC
Voltage Rating: 600 VAC/VDC
Fuse Current Rating: 30 Ampere
Line Wire Size: (1) 12 to 8 AWG Solid/Stranded (Copper), (2) 14 to 12 AWG Solid/Stranded (Copper)
Load Wire Size: (1) 12 to 8 AWG Solid/Stranded (Copper), (2) 14 to 12 AWG Solid/Stranded (Copper)
Terminal Type: Crimp (Line/Load Side)
Approval: UL, CSA